This manual outlines the process for installing the Radium fuel rail kit into an FRS-/BRZ/86. Metal cutting is required. Before beginning, relieve fuel pressure by removing the fuel pump fuse and run the engine until it dies.
Do not install this intake without also reflashing the appropriate mapping or severe engine damage can result. This intake system REQUIRES Mass Air Flow (MAF) sensor re-calibration for the vehicle to not only achieve full performance, but to also operate safely.
The Accessport is the industry leading OEM ECU flashing, managing and monitoring assistant. Unlock power hidden within the ECU by replacing conservative factory settings with more aggressive calibrations.
Describes how to install Perrin Performance Uppipe on Subaru models. Parts included are the Perrin Uppipe and five (5) 10x1.25x41mm double ended studs.
This guide will illustrate the installation of the GrimmSpeed Top Mount Intercooler on your 02-07 Subaru. This install is moderately challenging, so if this is your first TMIC swap, set aside at least a few hours so that you can take your time and do it right.
Describes how install Perrin cold air intake on '08-'14 Subaru Impreza WRX & STI. Lists parts included with the cold air intake and shows step by step how to remove the factory air box and install Perrin cold air intake.
Describes how to install Mishimoto fan shroud on '01-'07 Subaru WRX or STi. Parts included are Mishimoto aluminum fan shroud and 12" Mishimoto slim electric fans with OEM-style connectors.