Posts in category "Installation Guides"

• 

  Radium Engineering Fuel Rail Kit 2013+ FR-S, BRZ, 86

  2020-09-15

  This manual outlines the process for installing the Radium fuel rail kit into an FRS-/BRZ/86. Metal cutting is required. Before beginning, relieve fuel pressure by removing the fuel pump fuse and run the engine until it dies.
• 

  COBB Tuning SF Intake & Air Box - Installation Guide

  2018-07-11

  Do not install this intake without also reflashing the appropriate mapping or severe engine damage can result. This intake system REQUIRES Mass Air Flow (MAF) sensor re-calibration for the vehicle to not only achieve full performance, but to also operate safely.
• 

  Cobb Accessport Installation on Subaru Models

  2018-06-12

  The Accessport is the industry leading OEM ECU flashing, managing and monitoring assistant. Unlock power hidden within the ECU by replacing conservative factory settings with more aggressive calibrations.
• 

  Perrin Performance 1.75" and 2.00" Subaru Uppipe - Installation Guide

  2018-06-10

  Describes how to install Perrin Performance Uppipe on Subaru models. Parts included are the Perrin Uppipe and five (5) 10x1.25x41mm double ended studs.
• 

  Installing the GrimmSpeed 02-07 Subaru WRX / STI Top Mount Intercooler (TMIC)

  2018-03-10

  This guide will illustrate the installation of the GrimmSpeed Top Mount Intercooler on your 02-07 Subaru. This install is moderately challenging, so if this is your first TMIC swap, set aside at least a few hours so that you can take your time and do it right.
• 

  Perrin Cold Air Intake for 2008-14 WRX / STI - Installation Guide

  2018-03-05

  Describes how install Perrin cold air intake on '08-'14 Subaru Impreza WRX & STI. Lists parts included with the cold air intake and shows step by step how to remove the factory air box and install Perrin cold air intake.
• 

  02-07 Subaru WRX/STI Mishimoto Fan Shroud Installation Guide

  2018-02-28

  Describes how to install Mishimoto fan shroud on '01-'07 Subaru WRX or STi. Parts included are Mishimoto aluminum fan shroud and 12" Mishimoto slim electric fans with OEM-style connectors.