AVO Boost Controller

$313.49

Reduced price!
-5%
$329.99

Ships Free via Ground within 48 Contiguous States

Availability: Special Order

100% Geniune New AVO Product in Original Packaging
Authorized AVO Reseller

UUX00966EPSIJ

Low Boost Set; Hi Boost Set; Over-boost Alarm & Auto Shut-Down; Digital Boost Gauge; 30psi (2 Bar) Map Sensor

More details


WHY BUY FROM US
PayPal Credit ®
Special Financing from PayPal ®
Same-Day Shipping
On In-Stock Parts Ordered Before 2pm MST
Low Prices
Our Lowest Price Upfront
Safe & Secure
Verified & Secured By Comodo SSL

Description

The AVO Boost Controller is simple and easy to use, with a high range of adjustment for different turbocharger sizes and setups. Due to our decades of experience with turbocharged Subaru's, we've sat down and reinvented the wheel - optimizing the programming on this digital boost controller for the best response on a Subaru with the ease of setup everybody has wanted.

Low Boost / High Boost - Boost Set Point 0~30psi (0~2 Bar)
Sets your desired Boost Level

Offset Point adjustment from 0~50
Offset sets the solenoid starting time from the desired boost set point. For example, 15psi (1 bar) of boost with a offset of 10 = (10%) will start the solenoid at 13.5psi (.90 bar). The offset is used to control the boost rate rise. Some turbocharger setups can spool up too quickly, some too slowly. The Offset Point Adjustment is used to control these issues (boost overshoot).

Gain Set Point adjustment from 0~100
The Gain controls the solenoid duty cycle pulse width from the boost set point. This is a quite critical adjustment to control issues with exhaust back pressure and actuators (too soft or too hard). Adjustment of the Gain will allow for smooth, linear boost from your boost set point.

Overboost Shut Down
The Overboost Alarm and shut down is adjusted by the screw setting in the back of the box. (requires a Philips head screwdriver). Once you turn the screw you will see the screen flash with the boost threshold. Adjust it to your desired Shut Down level.

Reviews


Close

Product Review

Please make sure to fill out a review after you've installed the product. Your review should be your honest opinion, therefore, it can be positive or negative. We DO read your reviews, and relay infomation to manufacturers if a product needs to be changed or has issues.

Please keep in mind that reviews that say "This is a nice product" don't help other customers understand why they should or should not buy the product.

AVO Boost Controller
Low Boost Set; Hi Boost Set; Over-boost Alarm & Auto Shut-Down; Digital Boost Gauge; 30psi (2 Bar) Map Sensor
You must be logged in to post review.
No one has left a review yet.